Possible Delivery Service Interruption: Due to extreme weather in the northeast, delivery service may be temporarily suspended in these areas. Please visit the courier's website for more information: FedEx and UPS
Where to Find The Model and Serial Number on an Ariens Snow Blower
When trying to locate the model and serial number on your Ariens snow blower, see the information below for the most common locations of model and serial number information. Remember, most Ariens model numbers begin with a 9. Once you've located your model number, head over to our free Ariens parts lookup!
On an orange Ariens snow blower, the most commonly location of the identification tag is the rear of the engine frame, underneath the handles and between the wheels. You'll want to stand behind the unit and bend down to see this information. Please use the gray arrow above as a guide.
On the newer Ariens Sno-Tek™ snow blower, you must use the Ariens parts lookup to find both snow blower parts and engine parts. The model number and serial number information can be found by standing behind the snow blower and leaning down. Look between the two wheels and below the handles. Please use the gray arrow above as a guide.
If an Ariens snow blower is equipped with a Tecumseh engine, the most common location of the identification tag is on the lower right hand portion of the engine (this will be on your right if you're standing behind the unit), near the electric starter unit. Sometimes this information will be below the "WARNING" label. You will need the model and spec information off of the engine. Visit our Tecumseh parts diagrams to look up parts for Tecumseh engines.
If an Ariens snow blower is equipped with a older Tecumseh engine, the most common location of the identification tag is on top of the engine shroud near the spark plug. Sometimes this information will be underneath the electric starter unit and that may have to be removed so that you can properly read the numbers. You will need the model and spec information off of the engine. Please see our Tecumseh parts diagrams to look up parts.
If an Ariens snow blower was built in the last few years, it is most likely equipped with a Briggs & Stratton engine. The most common location of the identification tag is where the gray arrow is pointed above -- on the front cover below the muffler and near the snow blower's chute. You will need the model, type, and code information to look up the correct engine parts. Visit our Briggs and Stratton parts diagrams to look up parts.