200 lb. "Sure-Flow" Salt Spreader Vibrator (No Wiring)
Karrier Z-200

$150.00

Description

Sick of salt hanging out in your spreader instead of being spread? Looks like your vibrator died and you need a new one. Try the "Sure-Flow" and you won't regret it! The Karrier "Sure-Flow" Z-200 Vibrator is specifically designed as a drop-in replacement for 200 lb. salt and sand vibrators. It is compatible with every brand of slide-in hopper salt and sand spreaders on the market, AND it's backed by an unheard of 30-month industry-leading warranty.

span class="bold">Attention V-Box Spreader Owners
Steel v-box spreaders are stitch-welded and are not designed for heavy vibration. Some vibrator companies applying traditional vibrator sizing methods to salt spreaders sell their customers vibrators that put out more than 900 lbs. of force. The "Sure-Flow" Z-200 Twin (part # 204012-01) provides sufficient volume of vibration to make salt flow evenly from the largest salt spreaders on the road without damaging the spreader hopper. Higher force vibrators will damage your salt spreader and also generate a tremendous amount of noise on a steel salt spreader. Save your spreader and your ears -- get a "Sure-Flow" Z-200 Twin vibrator kit.

"Sure-Flow" Z-Twin vibrators are approved for use by the State of Ohio DOT on spreaders up to 16' long.

Disclaimer: Vibration is a destructive force and may cause damage to some types of equipment. While every precaution has been taken and years of field experience tells us this vibrator is safe to use on most plastic slide-in and steel v-box hopper spreaders, to avoid damage, do not use this or any other vibration device on your equipment. The application guide and replacement part information is provided below as a general guide for replacement, it is up to you to properly install the vibrator for best performance.

Brand Karrier
Part Number Z-200
Condition New
Duty cycle 30 minutes on
15 minutes off
Max amps 20
Operating temperature -20° to 40°F
Type DC
Voltage 12V
Weight 6 lbs.
  • High gloss powder coated finish
  • Water/chemical resistant enclosure
  • Internally vented motor
  • High temperature motor insulation
  • Industry standard electric connector
  • Industry standard mounting pattern
  • Designed, built and tested in the United States!
  • 30 month warranty