|
|
Clutch Pumps - Rear Port |
« Prev
1
Next »
|
|
| |
|
|
Clutch Pump - 5.37 GPM @ 1000 RPM - Rear Ports |
-
Part #:
- CP124RP
-
Brand:
- Buyers
- Clutch specifications:
- Electrical clutch - ON to engage; OFF to disengage
- Rated 90ft. lb. nominal, 120 ft. lb. after burnishing
- All electrical materials are rated at Class A (105 degrees C)
- Zinc plated for corrosion resistance
- PTO or PTO cables not required
- 12 volt unit
- Pump Specifications:
- High Performance, pressure loaded design
- Alloy steel shafts and gears
- Double-lip shaft seal
- Shaft rotation - clockwise (right hand when viewed form shaft end)
- Maximum continuous operating vacuum - 8" Hg
- System relief valve should be set at 1800 to 2000 PSI
- 10 micron return line filter required
- 3000 RPM max
Port Sizes:- Suction: 11/16 - 12
- Pressure: 7/8 - 14
- Maximum PSI 2,500
- Amp draw - 3.8 amps at rated voltage
- Minimum voltage required to engage clutch - 11 volts
- Maximum allowable applied voltage - 13 volts
- Two V-belt grooves or serpentine belts
|
|
|
|
|
|
|
Clutch Pump - 9.39 GPM @ 1000 RPM - Rear Ports |
-
Part #:
- CP217RP
-
Brand:
- Buyers
- Buyers clutch pump units provide a compact and efficient, easily installed source of hydraulic power for popular tracks or most off-road vehicles. These pumps are engine mounted, belt driven units with a specially designed mounting bracket. Controlled by a simple on/off switch in the cab, the clutch pump operates only when needed, even when the vehicle is moving
- Amp draw - 3.8 amps at rated voltage
- Minimum voltage required to engage clutch - 11 volts
- Maximum allowable applied voltage - 13 volts
- Two V-belt grooves or serpentine belts
Clutch specifications:- Electrical clutch - ON to engage; OFF to disengage
- Rated 90ft. Lb. nominal, 120 ft. lb. after burnishing
- All electrical materials are rated at Class A (105 degrees C)
- Zinc plated for corrosion resistance
Typical Applications:- Snow removal equipment
- Salt and de-icer spreaders
- Grain augers and conveyors
- Fertilizer spreaders
- Portable limber machinery
- Auxiliary circuits for frame and construction equipment
- Hydraulic tools
- Dump truck kits
- Whenever live hydraulics are required on a vehicle
Clutch Pump Features:- Engine mounted, belt driven clutch
- Adaptable to virtually any pickup truck, van, tractor, dump truck or vehicle with a 15 HP and up engine
- PTO or PTO cables not required
- 12 volt unit
Pump Specifications:- High Performance, pressure loaded design
- Alloy steel shafts and gears
- Double-lip shaft seal
- Shaft rotation - clockwise (right hand when viewed form shaft end)
- Maximum continuous operating vacuum - 8" Hg
- System relief valve should be set at 1800 to 2000 PSI
- 10 micron return line filter required
- 3000 RPM max
Port Sizes:- Suction: 15/16 - 12
- Pressure: 11/16 - 12
|
|
|
|
|
« Prev
1
Next »
Results per page: View All
|
|
