Aftermarket Bearings and Bushings |
Displaying 1 - 50 of 117 results
| Height | 5/8" |
| ID | 3/8" |
| Material | Rubber |
| OD | 1-1/16" |
| Replaces | CUB CADET 735-0149, 7350149, 935-0149, 9350149 EXMARK 1-513645, 46-6560 MTD 735-0149, 7350149, 935-0149, 9350149 NOMA 42690 SCAG 482571, 48309 SIMPLICITY 1654930, 1654930SM SNAPPER 1-2337, 12337, 1654930, 1654930SM, 7012337 TECUMSEH 33679 TORO 104047, 46-6560, 466560 TROY BILT 1738433, 935-0149, 9350149 |
| Height | 1.257" |
| ID | 1.117" |
| OD | 2.166" |
| Fits | EXMARK Lazer Z Triton deck |
| Replaces | EXMARK 109-2064 |
| Height | 1" |
| ID | 3/4" |
| OD | 1-3/8" |
| Fits | RELIANCE Wheel assemblies |
| ID | 5/8" |
| OD | 1-3/8" |
| Type | Heavy-duty angular contact ball bearing |
| Fits | RELIANCE Wheel assemblies |
| ID | 7/16" |
| OD | 1-1/8" |
| Type | Low-speed |
| Replaces | LESCO 050342 |
| ID | 1/2" |
| OD | 1-1/8" |
| Type | Low-speed |
| Replaces | LESCO 050337 MTD 741-0262, 741-0484, 7410262, 7410484, 941-0484, 9410484 |
| ID | 5/8" |
| OD | 1-3/8" |
| Type | Low-speed |
| Replaces | LESCO 050312 |
| ID | 3/4" |
| OD | 1-3/8" |
| Type | Low-speed |
| Replaces | LESCO 050327 SNAPPER 1-1807, 11807, 7011807, 7011807YP TORO 110513, 251-210, 251210 |
| Height | .525" |
| ID | .625" |
| OD | 1.375" |
| Type | Heavy-duty |
| Replaces | DIXIE CHOPPER 400275 GRASSHOPPER 120050 MCLANE 2036 OREGON 45-258 ROTARY 13418 |
| Height | 0.527" |
| ID | 0.750" |
| OD | 1.375" |
| Type | Heavy-duty |
| Fits | CUB CADET 30" and 40" cut decks DIXON 30" and 40" cut decks |
| Replaces | CASE C12110, C41167, C42624 CUB CADET 384881-R93, 384881-R94, 384881R93, 384881R94, IH-384891-R94, IH384891R94 DIXON 539116837, 539117197, 539129630, 8167, 9543 SNAPPER 1-1807, 11807, 7011807, 7011807YP TORO 110513, 251-210, 251210 |
| Height | 0.625" |
| ID | 0.750" |
| OD | 1.375" |
| Fits | AYP BS1960AR, L1900BR, L1910AR, L1930BT, L1950BR, L1960AR and L1970AR, 1999 and older NOMA 3189-0300 and 5290-2100, 32" cut decks |
| Replaces | AYP 625J MURRAY 39979MA NOMA 39979 |
| Height | 0.429" |
| ID | 0.623" |
| OD | 1.375" |
| Fits | ARIENS Many push and self propelled walk behind mowers SNAPPER 30" two stage large frame snowthrowers, series 0, 1, 3, 4, 5, 6; 25" rear engine riders, series 10, 12, 2, 3, 4, 5 and 9 |
| Replaces | ARIENS 05408900, 05415100, 05416200 BAD BOY 022-7009-00, 022-70090-00 DIXON 5028, 539125206 GRAVELY 036778 LESCO 050357 REF NO 499502H SNAPPER 1-0756, 7010756, 7010756YP TROY BILT 1185169, 1185436, 1701132, 1820278, 941-0155, GW-1185169, GW-1793 |
| Height | 0.495" |
| ID | 0.750" |
| OD | 1.380" |
| Fits | ARIENS Most 21 walk behind mowers BUNTON 410-350-5 caster wheels JOHN DEERE 100 and LX series, 410-350-5 caster wheels |
| Replaces | ARIENS 05408900, 05416200 BUNTON P0209, PL0941 CASE C12110 CUB CADET 384881-R93, 384881-R94, 384881R93, 384881R94, IH384891-R94, IH384891R94 GRAVELY 011193, 036778, 05408900 JOHN DEERE AM118315, AM127304, AM35443 MTD 741-0141, 7410141, 941-0141, 9410141, IH-384881-R94, IH384881R94 SNAPPER 7028722, 7028722YP STENS 215210 TORO 110513, 251-210, 251210 |
| Height | 1.145" |
| ID | 0.750" |
| OD | 1.375" |
| Replaces | REF NO FB-94318-NA, FB94318NA |
| Height | 0.590" |
| ID | 1.000" |
| OD (race) | 2.000" |
| Type | Tapered cone |
| Fits | SCAG New style spindles |
| Replaces | BAD BOY 010-7001-000, 0107001000, 011-7002-00, 011700200 DEALERS CHOICE 24-1510 EXMARK 1-543509, 1543509, 543509 GRAVELY 038199 GREAT DANE 28051, D28052 HUSQVARNA 539 10 26-26, 539102626 REF NO L44610, L44643 SCAG 48005-04, 48005-05, 4800504, 4800505, 481895, 481896, 48668 STENS 215103, 215111 |
| Height | 29/32" |
| ID | 29/33" |
| OD | 1-3/8" |
| Fits | MURRAY 46371X92A lawn and garden tractors, for 18 HP engines |
| Replaces | MURRAY 93064, 93064MA |
| Height | 0.657" |
| ID | 1.250" |
| OD | 2.328" |
| Fits | COLUMBIA Fork stem wheels CUSHMAN Differential JOHN DEERE 365, 855, 955, 2243, 3325 and 3365365, 855, 955, 2243, 3325 and 3365 TROY BILT Horse tillers |
| Replaces | ARIENS 05404600, 05404700 COLUMBIA 9045, 9048, 9049 CUSHMAN 320112, 386767 JACOBSEN 500535 JOHN DEERE JD8187, JD8225 REF NO LM67010, LM67048 TAYLOR-DUNN 80-011-00, 80-102-00, 8001100, 8010200 TROY BILT GW-11522, GW11522 WOODS 2303 |
| Height | 0.577" |
| ID | 0.620" |
| OD | 1.381" |
| Fits | DIXIE CHOPPER 50" and 60" cut decks GRASSHOPPER 6372, 9048, 9052 and 9061 JOHN DEERE PC2003 32"-52" commercial walk behinds |
| Replaces | DIXIE CHOPPER 10205 GRASSHOPPER 120050 JOHN DEERE PT8894 MCLANE 2036 MTD 741-0569, 7410569, 941-0569, 9410569 WALKER 5037, 5037-1, 50371 WOODS 70043 |
| Height | 3/4" |
| ID | 3/4" |
| OD | 1-1/8" |
| Fits | ARIENS 12970-12995, with spec. #000001 Fairway SIMPLICITY 3100, 4200, 5200 and 6500 riders |
| Replaces | ARIENS 05502800 JOHN DEERE C16522, M41522 SIMPLICITY 156316, 2156316 |
| Height | 9/16" |
| ID | 3/4" |
| OD | 1-3/8" |
| Fits | ARIENS 912001-912003 with spec. #000001, 26 Fairway |
| Replaces | ARIENS 05505800 NOMA 40195 TROY BILT 1720327, 1750341, 1750341099 |
| Height | 1" |
| ID | 3/4" |
| Material | Plastic |
| OD | 1-3/8" |
| Fits | AYP 6A1A1E, 6C1A7E, 6H1A9D, AK12542C and AK125HR38A HUSQVARNA YTH2448T MURRAY Riding mowers |
| Replaces | AYP 532009040, 9040H HUSQVARNA 532 00 90-40, 532009040 JOHN DEERE M123811 MURRAY 24367, 491334, 491334MA, 91334, 91334MA |
| Height | 3/4" |
| ID | 3/4" |
| OD | 1-1/8" |
| Replaces | AYP 3736R MURRAY 403010, 403010MA NOMA 39980 |
| Height | 3/4" |
| ID | 5/8" |
| OD | 3/4" |
| Fits | MTD 440, 450, 550, 552, 586, 588, 840, 841 and 850 (1987) series snowthrowers; 375, 380, 405 and 410 garden tillers |
| Replaces | MTD 748-0184, 7480184 |
| Height | 5/8" |
| ID | 5/8" |
| OD | 7/8" |
| Sides | 6 |
| Fits | MTD 020 and 030 tillers |
| Replaces | MTD 748-0227, 748-0227A, 748-0229, 7480227, 7480227A, 7480229, 948-0227A, 948-0229, 9480227A, 9480229 |
| Height | 3/4" |
| ID | 3/4" |
| Material | Plastic |
| OD | 1" |
| Fits | MTD 440, 450, 550, 552, 586 and 588 (1987-1988) series snowthrowers; 300, 400 and 500 series lawn tractors |
| Replaces | MTD 741-0293, 7410293, 748-0143, 7480143, 941-0293, 9410293 |
| Height | 2-9/16" |
| ID | 3/8" |
| OD | 5/8" |
| Fits | EXMARK 52", 60" and 72" cut decks and scalp rollers |
| Replaces | EXMARK 1-603602, 1603602 TORO 103-5364, 1035364 |
| Height | 0.839" |
| Height (collar) | 0.533" |
| ID | 1" |
| OD | 2.046" |
| Fits | BOBCAT 36", 48" and 61" XM series CUB CADET 100, 102, 122 and 123 GRASSHOPPER 9048, 52" and 61" decks HUSQVARNA 9048, 52" and 61" decks JOHN DEERE 300-317 hydrostatic tractors; M653-M655 Z Track |
| Replaces | BOBCAT 38348-01 BUNTON PL7323 CUB CADET 455102-R21, 586609-R92, 60069C91, IH-455102-R21, IH-586609-R92, IH-60071-C91, IH-60071-C92 DIXON 1701, 539115279 EXMARK 1-513016 GRASSHOPPER 120081 HUSQVARNA 539 10 26-77, 539 10 74-06, 539102677, 539107406 JOHN DEERE JD8597 REF NO CSA205-16 WALKER 5270 WOODS 60006 |
| Height | 3/4" |
| ID | 3/4" |
| Material | Plastic |
| OD | 1-1/4" |
| Fits | MTD 311-100A, 311-430A, 311-600A; 450, 550 and 580 snowthrowers |
| Replaces | MTD 741-0199, 7410199, 941-0490, 9410490 |
| Height | 3/4" |
| ID | 1/2" |
| OD | 3/4" |
| Replaces | AIR CAP 3999, T16276 K & S TRIM-ALL T16276 VELKE VHITCHBUSH |
| ID | 1/2" |
| Length | 3-3/8" |
| OD | 3/4" |
| Fits | ARIENS For front caster wheel 40 and 50 cut decks GRAVELY Front caster wheels 40 and 50 cut decks |
| Replaces | ARIENS 09023500 GRAVELY 011950 TORO 68-8980, 688980 |
| Height | 0.096" |
| ID | 0.572" |
| OD | 0.750" |
| Fits | MTD 600 and 659 variable speed pulleys, Master Cut and Yardman |
| Replaces | MTD 741-0404, 7410404, 941-0404, 9410404 REF NO SCE99 |
| Height | 3/4" |
| ID | 3/4" |
| OD | 1" |
| Fits | ARIENS 901011 20" rear tine tillers, 832003 20" and 24" snow attachments |
| Replaces | ARIENS 05511200 |
| Factory Backorder This product is currently on factory backorder with the manufacturer and is not currently available for shipment. We apologize for the inconvenience. Please contact us at orders@rcpw.com to find out when this part may become available again. |
Online Price
| Height | 5/8" |
| ID | 5/8" |
| Material | Plastic |
| OD | 7/8" |
| Sides | 6 |
| Fits | MTD 13B560B000, 13B5 |
| Replaces | MTD 741-0225, 7410225, 941-0225, 9410225 |
| Center to Center | 2-1/2" |
| Height | 0.758" |
| ID | 0.630" |
| Mounting Holes | Two 9/32" |
| OD | 3.250" |
| Fits | BOBCAT Mid-size walk behinds with Peerless transmissions TORO Mid-size units with Peerless transmissions |
| Replaces | BOBCAT 38213 TORO 51-4270, 514270 |
| Height | 25/32" |
| ID | 3/4" |
| Material | Plastic |
| OD | 13/16" |
| Fits | AYP 3363, 1999 and older; 3364, 1991; 9120A29, 1992; CC1236A, CT1036A and CT1236A/B, 1991 |
| Replaces | AYP 121922X HUSQVARNA 532 12 19-22, 532121922 |
| Height | 0.840" |
| ID | 0.750" |
| OD | 1.850" |
| Fits | BLUEBIRD Dethatchers, over seeders and aerators |
| Replaces | BLUEBIRD 0315 REF NO SA204-12, SA20412 |
| Height | 3/4" |
| ID | 1" |
| OD | 1-1/4" |
| Fits | BOBCAT 8 caster wheel support BUNTON 8 caster wheel support JOHN DEERE 160, 172, 261 rotary mowers PC1847; 54"-72" mid-mount mowers |
| Replaces | BOBCAT 48053-2A, 480532A BUNTON PJH1060 FERRIS 1520822 JOHN DEERE M83541 LESCO 050295 SNAPPER 2-3556, 23556, 7023556, 7023556YP |
| Height | 1-1/4" |
| ID | 7/8" |
| OD | 1-1/8" |
| Fits | EXMARK Viking, Explorer, Metro, Turf Tracer and TurfRanger SNAPPER Variable speed walk behinds |
| Replaces | ENCORE 363007 EXMARK 1-303044, 1-303514, 1303044, 1303514 HUSQVARNA 539 10 12-32, 539101232 KEES 101232, 363194, 976514 LESCO 050339 SCAG 48100-01, 4810001 SNAPPER 7-6514, 7076514, 7076514YP, 76514 |
| Height | 1" |
| ID | 5/8" |
| Material | Plastic |
| OD | 1-1/4" |
| Fits | MTD All lawn tractors |
| Replaces | MTD 741-0659, 7410659, 941-0659, 9410659 |
| Height | 29/32" |
| ID | 5/8" |
| Material | Plastic |
| OD | 13/16" |
| Fits | MTD 400, 600 and 700 series lawn tractors |
| Replaces | DEALERS CHOICE 107-625 MTD 741-0487, 741-0487A, 741-0487C, 7410487, 7410487A, 7410487C, 941-0487A, 9410487A |
| Height | 1" |
| ID | 0.750" |
| Material | Plastic |
| OD | 0.945" |
| Fits | MTD All garden tractors except 1995 units |
| Replaces | MTD 741-0660, 741-0660A, 7410660, 7410660A, 941-0660, 9410660 |
| Height | 21/32" |
| ID | 3/4" |
| OD | 1-3/16" |
| Fits | ARIENS 36" and 40" snowthrowers, Sierra, High Sierra series and YT tractors GRAVELY 815006-000101, 834034-000101, 836011-000101, 834035-000101, 987103 (GLT584H) and 987107 (GLT584H) |
| Replaces | ARIENS 05521600 GRAVELY 05521600 JACOBSEN 53836 JOHN DEERE M127093 NOMA 53836 |
| Height | 1.125" |
| ID | 0.751" |
| OD | 1.375" |
| Fits | SIMPLICITY Regent, Sports and Broadmoor series |
| Replaces | SIMPLICITY 1713167 STENS 225817 |
| Height | 5/8" |
| ID | 1" |
| OD | 1-1/8" |
| Fits | ARIENS 824 JOHN DEERE 828D, 924DE, 1032D, 1128DDE, 1128DE and 1332DDE walk behind snowthrowers |
| Replaces | ARIENS 05503500 JOHN DEERE M124417 REF NO 62042RSNR |
| Height | 5/8" |
| ID | 3/4" |
| OD | 1" |
| Fits | ARIENS 832 and 1032, 20, 24 and 32 snowthrower attachments scoops JOHN DEERE 524D, 724D (PC2569) and 826D (PC2570) walk behind snowthrowers |
| Replaces | ARIENS 05503900 JOHN DEERE M127082 |
| Height | 5/8" |
| ID | 7/8" |
| OD | 1" |
| Fits | ARIENS 824, 24" and 32" snowthrower attachments drive train, 910 and 924 non-differential |
| Replaces | ARIENS 05503000 |
| Height | 1-1/4" |
| ID | 7/8" |
| OD | 1-11/16" |
| Fits | TORO 521-824 impeller shafts |
| Replaces | TORO 12-8789, 128789, 26-6100, 266100, 63-3450, 633450 |
| Height | 0.431" |
| ID | 0.628" |
| OD | 1.373" |
| Fits | ARIENS 24 and 32 snowthrower attachments drive train CUSHMAN Truckster MTD 020, 030, 406, 430, 700, 719, 730, 740, 756 and 766 series MURRAY Lawn edgers SCAG Turf Tiger YAZOO YR60 and YR76 |
| Replaces | ARIENS 05403900, 05435100 BUNTON PL4969 CUSHMAN 812899 DEALERS CHOICe 24-1100 DIXIE CHOPPER 67205 HOFFCO 204906S MCLANE 2036 MTD 741-0155, 7410155, 941-0155, 9410155 REF NO 99502H SCAG 48224 SIMPLICITY 1665521 SNAPPER 1665521SM TROY BILT 1185169, 941-0155, 9410155 WALKER 5037-1, 50371 YAZOO 204-020, 204020 |
| Height | 0.464" |
| ID | 0.570" |
| OD | 1.375" |
| Replaces | ARIENS 05413700 HUSQVARNA 606 00 01-85, 606000185 UNIVERSAL 8401-2RSNR-TN, 84012RSNRTN |
| Factory Backorder This product is currently on factory backorder with the manufacturer and is not currently available for shipment. We apologize for the inconvenience. Please contact us at orders@rcpw.com to find out when this part may become available again. |
Online Price
Customer Service
Shop Online Confidently
We work closely with GoDaddy and PayPal to provide a secure online shopping environment. We are highly recommended by customers on Reseller Ratings and have an A+ BBB rating.
Contact Us
Phone
Local: (330) 467-1332
Toll Free: (800) 937-7279 (U.S. Only)
Email
orders@rcpw.com
Address
600 E. Highland Road
Macedonia, OH 44056
Hours of Operation
Monday - Friday: 9 a.m. - 4:30 p.m.
Find Us On:
Copyright © 1996-2019 Replacement Commercial Parts Warehouse. All Rights Reserved.