Buyers SaltDogg 10.0 Cubic Yard Hydraulic Powered Stainless Steel Hopper Salt Spreader Kit (6:1 Ratio Gearbox)
Buyers 1461057SSH

Buyers Logo

$10,702.27

Additional Shipping Required

Due to the weight and/or size of this product, additional shipping charges not charged within our web cart are required. We will contact you after your order has been received with the cost or you're welcome to contact us at orders@rcpw.com before placing the order to find out what the cost would be to your location.

Description

Compares to: Henderson FSH and Swenson EV-100.

Brand Buyers
Part Number 1461057SSH
Condition New
Capacity10.0 cu yds
ChuteAdjustable
ConstructionStainless steel
Feed Mechanism24" W conveyor, 6:1 gearbox ratio
Gearbox Ratio6:1
Height 57"
HopperStainless steel
Hopper Width 82"
Ideal UseMunicipal & commercial
Inverted VStainless steel
Length (Hopper)144"
Length (Overall)167"
Mounting4-point tie down or tailgate latch option
Overall Width 82"
Power Source2 independent direct drive hydraulic motors
Spinner20" poly
Spread Width 4-40 feet
Spreading MaterialBulk salt; 50/50 salt/sand mix
Top Screen(6) 3/8" black powder coated steel
Vehicle ApplicationMinimum GVW of 35,000 lbs. (Truck Application is only a reference. The Gross Vehicle Weight (GVW) of the truck & calculated payload must be evaluated for each application.)
Weight3,084 lbs.
  • Capacity: 10 cu. yds. (12')
  • 304 stainless steel hopper
  • Material spread up to 40'.
  • Adjustable feedgate
  • Power source: hydraulic drive - two independent direct drive hydraulic motors (17 GPM @ 1,500 PSI). 15 gpm conveyor. 12 gpm spinner.
  • 24" wide conveyor chain with 3/8" crossbars
  • Chute/spinner assembly: 304 stainless steel, with adjustments to accommodate varying body mounting heights. 6-fin poly spinner disc. Adjustable deflectors with overlapping corners provide a precision spread pattern.
  • Feedgate: 304 stainless steel with scaled driver side screw jack adjustment.
  • Conveyor: 24" wide with 2" diameter drive shaft. 6:1 direct-drive gearbox with extended throughshaft for ground speed sensor. 1-1/2" diameter idler shaft with 4" adjustable range relubeable bearing.
  • Includes: 4-section hinged top screens, 3/8" bars on 3" centers, stainless steel inverted V, adjustable
  • 2" drive shaft and bearing with 8-tooth sprockets
  • 1-1/2" idler shaft and bearings with 8-tooth sprockets
  • Quick release hinged chute (no tools needed)
  • 20" poly spinner disc